Features and uses

● Modular design, industrialization engineering, wide selection range, can meet different processing requirements.

● The main basic components are made of resin sand, with secondary aging treatment, special box-shaped structure and optimized arrangement of reinforcing ribs, so that the machine tool has good rigidity and shock absorption capacity.

● The three-axis feed is driven by high-precision ball screws, and is matched with plastic-coated and hardened guide rails. It has the characteristics of good wear resistance, low friction and high rigidity.

● "Guangshu" GSK980MDi control system, X, Y, Z three-axis servo motor, spindle servo motor, can realize four-axis three-linkage, and also have functions such as drilling, tapping, and milling.

● LCD Chinese menu, man-machine dialogue programming, easy to operate, practical and reliable.

● The automatic centralized lubrication method is adopted, and each lubrication point (such as guide rail, ball screw, etc.) is regularly and quantitatively lubricated to ensure that the important parts are well lubricated.

● Special configuration: fully enclosed protection/drawer type manual chip collector (or chain plate type chip conveyor).

 

Technical parameters of ZXK5840 series CNC drilling and milling machine

Product Specifications Main Technical Specifications				ZXK5840F	ZXK5840F/1	ZXK5840F/2
Working desk size			mm	1100×450	1100×650	1250×650
T-slot width x number of slots				18×3	18×5	18×5
Table travel X axis			mm	850	850	1200
Table travel Y axis			mm	400	600	600
Headstock travel Z axis			mm	250	250	250
Rear box travel (manual)				470	470	470
Distance from spindle end face to table			mm	120-840	110-830	140-860
Maximum hole diameter			mm	45(U drill)	45(U drill)	45(U drill)
Maximum feed resistance			N	10000	10000	10000
Spindle maximum output torque			Nm	100	100	100
Spindle hole taper				BT40	BT40	BT40
Spindle				Internal cooling (central water outlet)
Main motor power (spindle servo motor)			kw	5.5/7.5	5.5/7.5	5.5/7.5
Spindle speed change range			r/min	50-3000	50-3000	50-3000
Control method				GSK980MDi four-axis CNC, three-axis linkage
Feed scope	Work in	X、Y	mm/min	0.6-3000	0.6-3000	0.6-3000
		Z	mm/min	0.3-2000	0.3-2000	0.3-2000
	Fast forward	X、Y	mm/min	9000	9000	9000
		Z	mm/min	4500	4500	4500
Positioning accuracy			mm	0.04	0.04	0.04
Repeatability			mm	0.015	0.015	0.015
Dimensions			mm	2750×1600×2400	2750×1900×2400	3100×2200×2400